If you are looking for the answer of what to buy when building a pc, you’ve got the right page. We have approximately 10 FAQ regarding what to buy when building a pc. Read it below.
Pc Building Process Flow Chart
Ask: Pc Building Process Flow Chart
Di ko po sure kung itong kind of PC Building yung sainyo, pwede kasing kasama na sa lesson nyo kokopyahin mo nalang.
What is the importance of knowing first the specification before
Ask: What is the importance of knowing first the specification before buying a laptop or upgrading a PC?
Well, it’s largely because these specs greatly affect the utility of the computer. Seasoned computer users probably already know how each of these stats affect computer performance, and may need even more detailed information (such as CPU clock speed, cooling performance, dedicated graphics processor stats, etc.).
7 Important Factors to Consider When Buying a New Laptop
- Screen Quality
- Battery Life
- USB 3.0 Ports
3. Are you thinking about buying a new computer or
Ask: 3. Are you thinking about buying a new computer or laptop? If given a chance to buy,
you will know what type of computer you should get by answering just a few important
Type: Do you want a Desktop PC or a Laptop?
Purpose: What will you be using your brand-new PC for?
Budget: How much are you willing to spend?
Assemble! Order a Pre-Built PC or build it yourself?
- For education
- I will build it myself
Purpose: Depends on you, It’s either for school purposes or work
Budget: For me, probably the range of 15,000-30,000 up since laptops with higher prices tend to be more long lasting since they’re made from good brands
Assemble: If you do know how to assemble a PC and had enough time to built it then you can order it by parts, If not, then it’s better to buy an already built PC
how to build pc for step by step
Ask: how to build pc for step by step
Computer Assembly Steps
Step 1: Open Case
Remove the back screws
Take side cover off
Its easiest to work on your PC with it laying sideways on a flat surface, so the open side is facing up. Don’t forget to ground yourself (by touching the case) before working on assembling parts.
Keep any screws which were supplied with the case separate and take note of the different types. Most cases will come with a few different packets of screws and they may have different sizes or threads, so make sure to match them up with the correct mounting locations as best as possible. If in doubt, refer to the documentation which came with your computer case.
Step 2: Mount Motherboard
Screw motherboard standoffs into the case
Punch out rear I/O plate from the case (if existing) and replace it with the motherboard I/O plate
Fasten the motherboard in place on top of the mounting standoffs
There a few different sizes (also known as ‘form factors’) of motherboard commonly available, so most cases have screw positions that will accommodate the various sizes of motherboard. You don’t need to install mounting standoffs in all of them; just the ones that match your motherboard will be fine.
The I/O plate is an input-output plate which is simply a metal cover that is customized to your particular motherboard. You’ll need to remove the default I/O plate that may have been supplied with your case and swap it out for the one that came with your motherboard.
Screws and standoffs are often supplied with your computer case, however sometimes screws may be supplied with a motherboard.
Step 3: Mount Processor (CPU)
Locate the CPU socket holder on the motherboard
Lift up the latch lever to release and hinge open the CPU socket cover.
Holding the CPU by its sides, line up any alignment notches or the triangle marked on the corner of the CPU to the triangle marked on the motherboard. Gently place it straight down into the motherboard socket to seat the CPU
Lower the CPU socket cover over the CPU and lower the latch lever closed again to secure the CPU socket holder closed
Don’t apply force to seat the CPU. Avoid touching of pressing down on the back of the CPU with your fingers, as any residue from your hands can destroy the heat transfer surface for the cooler which will be mounted next.
Another important thing to note is to remove any plastic packaging around the CPU socket cover before installing your CPU and cooler. Usually there is a piece of removable hard plastic somewhere around the CPU socket cover which serves to protect the CPU terminal pins on the motherboard. Be sure to remove and discard this as you install your CPU.
Step 4: Install CPU Cooler
Make sure the CPU cooler is installed directly to the back of the CPU metal housing. We’ve heard stories of installations where the plastic packaging on the CPU socket cover (which is meant to be discarded after CPU installation) was not removed, and the CPU cooler was mistakenly mounted to the plastic. Don’t make this expensive mistake, as this will cause overheating and damage to your CPU.
If required, apply thermal paste to the back of the CPU
Seat CPU heatsink/cooler and fix in position.
Plug the power cable attached to the cooler fan into the motherboard connector.
Some CPU coolers do come with a thermal pad already applied, in which case you can skip step 1. If yours doesn’t, you will need to apply thermal paste to the CPU surface before seating the CPU cooler in position.
Cable headers on motherboards vary in their location depending on what motherboard you have. To identify the correct header, look for the labeling on the motherboard; they are always labeled next to the header with the intended connection, for example:
CPUFAN = CPU fan
SYS_FAN1 = System fan (any general fan can be plugged in here)
SYS_FAN2 = System fan (any general fan can be plugged in here)
Step 5: Install Power Supply (PSU)
Mount the power supply and fasten with screws to the case mounting points
Kiko goes to bakery shop to buy pandesal. A pandesal
Ask: Kiko goes to bakery shop to buy pandesal. A pandesal cost PHP2.00 each. However the bakery shop offers a promo sale that if you buy more than 20 Pcs of pandesal in terms of x? If kiko buys 15 Pcs, 22 Pcs, or 25 Pcs, how much he will pay
asan Po question about that
when my money is 20 pcs i buy some 7
Ask: when my money is 20 pcs i buy some 7 pcs shampoo how muchmy change baranely
13 just subtract 20 from 7
pa brainly if tama po sagot
correct me if I’m wrong and if correct pabrainlest po ty
is it difficult to build a customize pc
Ask: is it difficult to build a customize pc
It won’t be that diffucult if you already have plans on your pc and you already have stores or people to contact with when you already want to buy something for you pc. It would maybe be difficult if you don’t have that enough knowledge and the budget too
the importance specification when you are going to buy your
Ask: the importance specification when you are going to buy
your own pc
- SCREEN RESOLUTION
in your own perspective, what is the importance of building
Ask: in your own perspective, what is the importance of building your own pc?
•Building a Gaming PC is Cost Efficient.
•Building a PC Allows for Easier Upgrades.
•You Will Have a Superior Cooling System.
•Building a PC Gives You a Skill You’ll Keep Forever.
•Building a PC Gives You the Option for Higher Quality Parts.
•No More Waiting for Tech Support.
•Building a PC Eliminates Bloatware.
WHAT ARE THE BENEFITS OF BUILDING A PC?
BENEFIT #1 – BUILDING A PC IS MORE AFFORDABLE. …
BENEFIT #2 – BUILDING A PC LETS YOU FINE-TUNE HARDWARE AND SOFTWARE. …
BENEFIT #3 – BUILDING A PC PROVIDES THE (RELATIVE) EASE OF MAINTENANCE. …
BENEFIT #4 – BUILDING A PC OFFERS EXTENDED SERVICE LIFE & UPGRADES.
what are all the things needed to build a pc
Ask: what are all the things needed to build a pc
Here is the Computer Parts List with all the basic Hardware Parts that you will need for a functioning PC:
GPU [Graphics Card] (if no integrated GPU)
Storage Device (SSD, NVME SSD, HDD)
Cooling (CPU, Chassis)
PSU [Power Supply Unit]
Hope it helps Good luck and Bless you!
Not only you can get the answer of what to buy when building a pc, you could also find the answers of What is the, 3. Are you, in your own, how to build, and the importance specification.