# What Happens When Gear Linkage Breaks

Posted on

If you are looking for the answer of what happens when gear linkage breaks, you’ve got the right page. We have approximately 10 FAQ regarding what happens when gear linkage breaks. Read it below.

## The sugar formed when two monosaccharides are joined by glycosidic

Ask: The sugar formed when two monosaccharides are joined by glycosidic linkage. ​

Disaccharides are composed of two monosaccharide units linked together by a glycosidic bond. The most common glycosidic bonds connecting monosaccharide units are O-glycosidic bonds in which the oxygen from a hydroxyl group becomes linked to the carbonyl carbon.

Explanation:

hope its help

## what will happen if u travel in the speed of

Ask: what will happen if u travel in the speed of sound without a gear​

air cannot readily move out of the way and a shock wave is formed

Explanation:

‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍  ‍

Explanation:

## what will happen if you don't use the appropriate swimming

Ask: what will happen if you don’t use the appropriate swimming gear and equipment ​

you might get sunburn because of too much exposure from the sun’s radiation

## 7. Which of the following shows that friction could be

Ask: 7. Which of the following shows that friction could be harmful? A. writing on the board B. holding a piece of paper c. tearing out of bicycle gears D. using breaks when stopping ​

D using the breaks when stopping

Explanation: kasi pede kang mahulog pag malakas ang break at pede karin masaktan pag nakipag break 🙁

hehe yan lng alam ko

1.c

Explanation:

Delikado ang hindi magsout ng bike gears

## It is a combination of oil and thickeners used for

Ask: It is a combination of oil and thickeners used for equipment with gears,bearings,chains and linkages

## Two connected gears are rotating. The smaller gear has a

Ask: Two connected gears are rotating. The smaller gear has a radius of 5 inches, while the radius of the larger gear is 7 inches. What is the angle through which the larger gear has rotated when the smaller gear has made one complete rotation?

(view the pic for more po) ​

## Question:

Two connected gears are rotating. The smaller gear has a radius of 5 inches, while the radius of the larger gear is 7 inches. What is the angle through which the larger gear has rotated when the smaller gear has made one complete rotation?

## Given:

Let r = radius of the smaller gear which is 5 in

R = radius of the larger gear which is 7 in

The ratio of the radius are:

r : R = 5 : 7

## Problem 1:

1.) What is the answer to the question in problem no 1 if the angle unit is degrees? Type your answer. (Answer must be rounded off to one decimal place, do not include the unit, just the number).

## Solution:

1 full rotation = 360 degrees.

For one full rotation of the smaller gear, the larger gear is rotated through

= (5/7)(360)

= 257.1 degrees

Note: Answer must be rounded off to one decimal place, do not include the unit, just the number)

## Problem 2:

2.) What is the answer to the question problem no 1 if the arc length unit is centimeter? Type your answer. (Answer must be rounded off to two decimal place, do not include the unit, just the number).

## Solution:

1 inch = 2.54 cm

5inches x 2.54cm / 1 in = 12.7cm

7inches x 2.54cm / 1 in = 17.78cm

= (12.7 / 17.78) (360)

= 257.14 degrees

Note: (Answer must be rounded off to two decimal places, do not include the unit, just the number).

## 1. Two connected gears are rotating. The smaller gear has

Ask: 1. Two connected gears are rotating. The smaller gear has a radius of 5 inches, while the radius of the larger gear is 7 inches. What is the angle through which the larger gear has rotated when the smaller gear has made one complete rotation?​

Let r represent the radius of the smaller circle and R the radius of the larger circle.

Apply ratios: the radius of smaller circle to radius of larger circle, i.e.

r: R = 3 : 7.

I complete rotation = 360 degrees.

Part 1:

For one complete rotation of the smaller circle, the larger circle is rotated through: (3/7)*(360) = 154.3 degrees

Part 2:

For one complete rotation of the larger circle, the larger circle is rotated through: (7/3)*(360) = 840.0 degrees

This is equivalent to (840/360) = 2.3 rotations

Alternatively, use the ratios:

The number of rotations = R/r = 7/3 = 2.3 rotations

## Why is it needed to observe the tire pressure of

Ask: Why is it needed to observe the tire pressure of the main wheels?

Does the nose landing gears has break system?if yes what for? If No why don’t have?

Insuring the temperature on the break system are in normal rage to avoid?

If incase the hydraulic system fails to extend the landing gear the pilot must use what device to engage the landing gears.

What is ecam and give its function?

Give the difference in the two ecam?

in case there were amber color signal with the horn, what it means?

1.Keeping your car’s tires properly inflated to the automaker’s recommended pressures is a critical element of tire maintenance

2.When an aircraft is unable to touch down with its landing gear fully extended it must perform a gear-up or “belly” landing.

3.Anti-lock brakes are a highly-touted feature in modern cars, but they do have drawbacks. Learn more about anti-lock brake system (ABS) pros and cons.

4.Electronic Centralized Aircraft Monitor (ECAM) is defined as is a system on Airbus aircraft for monitoring and displaying engine and aircraft system information to the pilots.

5.The compare means t-test is used to compare the mean of a variable in one group to the mean of the same variable in one, or more, other groups.

6.Any turn signal system used to give a signal of intention to turn right or left shall project a flashing white or amber light visible to the front and a flashing red or amber light visible to the rear.

hope it helps føllow for more

## Hydrolysis can break linkages of? Peptides only Fat chains Amides

Peptides only
Fat chains
Amides and peptides
Amides only

In hydrolysis reactions, a water molecule is consumed as a result of breaking the covalent bond holding together two components of a polymer.

I don’t know if it’s tama po,pero hope it helps

## Why is it needed to observe the tire pressure of

Ask: Why is it needed to observe the tire pressure of the main wheels?

Does the nose landing gears has break system?if yes what for? If No why don’t have?

Insuring the temperature on the break system are in normal rage to avoid?

If incase the hydraulic system fails to extend the landing gear the pilot must use what device to engage the landing gears.

What is ecam and give its function?

Give the difference in the two ecam?

in case there were amber color signal with the horn, what it means?